neoshoind

Meuser Radial Arm Drill, $7,900.

Meuser Radial Arm Drill–5 Foot Arm–13” Column–#5 Morse Taper in Spindle—3.5” Drilling Capacity–Geared Head–18 Speeds— 30 RPM to 2,400 RPM—Power Clamping–Power Elevation–-12” Quill travel-–.0024-.032” Feeds per Rev.–Tilting Knee–Serial Number: 43676–Good Condition–German Made–High Quality. Can be demonstrated under power—$7,900 FOB Neosho, Missouri Call Patrick at 832-980-7500

Kingston CNC Lathe $22,500

Kingston CNC Lathe TJ-1650–FAGOR 8055 CNC Control- 7.5HP- -15.7″ Swing–39″ Turn length–8″ 3 Jaw Chuck –2.1″ Spindle Bore–D1-6 Spindle Nose–Aloris Tool Post–Tailstock–Manual Electronic Handwheels–Weight 4,400lbs–240 Volt-3 Phase–Under Power–LIKE NEW!! $ 22,500–FOB NEOSHO, MISSOURI—

Bridgeport Mill 2 Axis CNC/Manual $8,900

2 hp-Variable Speed-R8-Power Drawbar-9″x48″ Table-Ball Screws X/Y-Can be run manual or CNC 2 Axis-Ways are Good-Head is Quiet-230 Volt, 3 phase- Can be demonstrated under power– $ 8,900 FOB Neosho, Missouri-Call 832-980-7500.

SOLD-Mazak Lathe 34” x 100”, 4.1” Spindle Bore $16,900.

Mazak Lathe 34” x 100”, 4.1” Spindle Bore.–Made in Japan–Swing Over Bed Ways: 35″– Centers: 100”–Swing Over Cross Slide: 24-3/4″–Swing in Gap: 44-1/2″–Spindle Thru Hole: 4-1/8″–Spindle Nose Type: D-11 Camlock–(16) Spindle Speeds: 12 to 1200 RPM–Tailstock Quill Taper: #6 Morse–Tailstock Quill Diameter: 3-15/16″–Tailstock Quill Travel: 11-13/16″– Three Steady Rests, 24”, 17”, and 8”.– 4 JawContinue reading “SOLD-Mazak Lathe 34” x 100”, 4.1” Spindle Bore $16,900.”

21″ x 120″ Fortune Royal Lathe $14,900.

used Fortune Royal Lathe 21″x120″ Model: S21120G — Taiwan Made High Quality– Year 2001.–SN. 1057003.–21″ Swing over the Bed.–Heavy Full Length Cast Iron Base.–30″ Swing in Gap.–120″ centers distance.–3.1″ Spindle bore.— D1 Cam-Lock Spindle nose. — 10 hp.–26-1500 RPM.–Rapid Traverse Carriage.–Inch Metric gearbox.–Tool Post.– Taper Attachment.– Quick Change Tool Post–4 Jaw Chuck.–2 Steady Rests–. ElectronicContinue reading “21″ x 120″ Fortune Royal Lathe $14,900.”

New 18″ Hydraulic Chuck with Back Plate. model: N-218. Auto Strong brand. Taiwan made. Our Price $5,950. (New price $7,800)

SOLD-Mori Seiki lathe 24″x 80″, 3″ spindle bore. SN. 3627. Price $9,950 FOB Neosho.

Axelson Lathe 16″x30″ $3,500 fob Neosho.

Spindle Speeds up to 1,127 RPM. Inch/Metric Threading. D1-6 Spindle Nose. Comes with 3 Jaw Chuck and Tool Post not shown. American Made. Heavy Built. 240 volt, three phase. Can be demonstrated under power. Schedule a Visit, Nights and weekends by appointment. Call Patrick, mobile: 832-980-7500.

Okamoto 6″x18″ Surface grinder $7,500 fob Neosho.

This Japanese Surface grinder operates as smooth as silk. Walker CeraMax permanent magnet chuck. Over Wheel Dresser. Can be demonstrated under power. Plan a visit, Nights and Weekends by appointment. Call Patrick, mobile: 832-980-7500.